Thesycon Driver 4.86 Download
Thesycon Modems Driver Vs

USB Audio 2.0 Class Driver for Windows

Connect using direct serial. USB connection: Modem – Erio. USB Network Drivers for Windows 10, 8.1, 8 and 7 Thesycon's USB network drivers provide a network adapter emulation on Windows operating systems. Q: Why my Erio Connection USB ModemDirect driver doesn't work after I install the new driver?
THESYCON XMOS DRIVER - After the installation find the Uninstall file most likely in C: If there is more than one clock source then a clock selector unit must be implemented as well. Thank you for suggestion, but I already knew it - Marcin from JPlay made it very clear - set buffer as low as possibly, unless you get a clipping sound - than.
Thesycon commands expertise in several areas surrounding the development of device drivers and firmware. Below, we give a selection of the projects that have benefited from our expertise. Each item listed below refers to development work that Thesycon successfully completed either under contract to a client company or as product development.

To load the driver, you need to write an inf that references the modem inf by using the include directive. This the generic driver that comes with the generic wireless 300n mini wireless usb that is usually on ebay or you are using windows 10 you can pretty much plug the device in without having to install the drivers as windows 10 does.

FeaturesSupported PlatformsDemoPrices

Thesycon’s USB audio class driver TUSBAudio targets USB audio devices for professional and semi-professional use and highest quality audiophile HiFi systems. The driver supports devices which are compliant to the USB Audio 2.0 or USB Audio 1.0 device class specification. The driver provides an ASIO 2.3.1 compliant software interface and integrates with Windows as a standard WDM/DirectX compatible sound device. If the device provides MIDI features the driver exposes standard Windows MIDI ports.

To meet professional audio requirements, the audio class driver is optimized for low latency and low CPU load. Buffer depths can be adjusted by the user to optimize settings for a given computer. The driver implements a transparent (bit-perfect) playback and recording data path.

General

supports Audio class 1.0 and Audio class 2.0 devices
supports USB 2.0 full speed and high speed, and USB 3.0 super speed or higher
supports standard sampling rates (depending on device capabilities):
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz, 1411.2 kHz, 1536 kHz
supports USB Audio Type I sample formats:
PCM 16 bit, PCM 24 bit, PCM 32 bit, FLOAT 32 bit
supports stereo and multi-channel configurations with as many channels as the device implements

ASIO

ASIO 2.3.1 compliant driver DLL
sample formats (depending on device capabilities): PCM 24 bit, PCM 32 bit
bit-perfect playback and recording through ASIO
playback mix (simultaneous ASIO and WDM playback)
supports both 32-bit and 64-bit ASIO host applications
multi-client support (multiple ASIO applications in parallel)
configuration of ASIO buffer depth via driver control panel
ASIO DSD mode supported (playback and recording), see below DSD Support

Microsoft usb video device driver. The TUSBAudio driver uses ASIO Driver Interface Technology and the Steinberg ASIO SDK. ASIO is a trademark and software of Steinberg Media Technologies GmbH.

WDM/DirectX Features

standard Windows sound interfaces: MME, DirectSound, WASAPI
stereo and multi-channel playback and recording sound devices (depending on device capabilities)
flexible sound device configuration, for example:
8-channel unit can either be exposed as 7.1 or 4 x stereo playback
bit-perfect playback and recording through WASAPI
volume and mute control through Windows standard GUI (depending on device capabilities)
jack sensing (depending on device capabilities)
PCM 16 bit, 24 bit, and 32 bit sample format (depending on device capabilities)

DSD Support

native DSD mode through ASIO (see above)
DSD over PCM (DoP) supported through ASIO and WDM
DSD sample rates: DSD64 (2.8MHz), DSD128 (5.6MHz), DSD256 (11.3MHz), DSD512 (22.6MHz), DSD1024 (45.2MHz)

MIDI Features

Windows compliant MIDI input and output ports (depending on device capabilities)
Multiple applications can share a MIDI input port.
Optionally, multiple applications can share a MIDI output port.

Virtual Channels Add-on

The Virtual Channels Add-on is an optional component of the TUSBAudio driver and has to be licensed additionally.

virtual input or output channels can be defined (e.g. loopback channels)
virtual WDM sound devices can be built from virtual channels
arbitrary signal routing between physical and virtual channels can be configured
routing and weights are fixed (not dynamically configurable through API)

Mixer Add-on

The Mixer Add-on is an optional component of the TUSBAudio driver and has to be licensed additionally.

driver implements complete mixer matrix for all input and output channels
any mixer weight can be controlled through API at runtime
SDK included, contains sample application for mixer control
virtual input or output channels can be defined (e.g. loopback channels)
virtual WDM sound devices can be built from virtual channels
application examples: monitor mix, loopback channels, channel swap, balance, etc.

The driver will be delivered fully customized for licensee’s product.
Customization includes USB VID/PID, file names, text strings, etc.
Windows 10 version of the driver is signed with Microsoft Attestation signing.
Windows 7/8 version of the driver is signed with Thesycon’s code signing certificate.
Driver Customization Kit add-on: The Driver Customization Kit enables licensee to customize the driver by themselves.

Wizard style user interface for interactive use
Command line interface (silent mode) for integration into overall software setup
Customization possible

Control panel application with graphical user interface is included
Device status and control via private programming interface (DLL)
Source code of the control panel is part of the SDK.

DFU utility with graphical user interface is included
Firmware upgrade according to DFU device class
Customization and Multi-language user interface is possible
Source code of the DFU utility is part of the SDK.

NOTE: A DFU utility with identical functionality is available for macOS as well.

The SDK add-on is an optional component. It enables custom control panel development and direct access to custom firmware features. The SDK includes:

API definition and link library for TUSBAudio API DLL
API reference documentation
Source Code of sample control panel implementation
Source Code of DFU Application

Windows 10
Windows 8.1
Windows 8
Windows 7

The USB Audio 2.0 Class Driver for Windows implements the USB Audio 2.0 and 1.0 device cla

Thesycon Modems Driver